High-Performance Power Conversion Seminar & Workshops in a city near you
Resource Library
Resource Library
Meeting DC-DC Power System Requirements in Defense Applications
Your Power System Failed its Conducted EMI Test – Now What?
Maximum Load: The Wrong Specification for Pulsed Power
Designing Power Systems for Modern Railway Applications
VITA 62 Power Supply 270VDC Input I2C™Communication
Thermal Simulation for Cooler Power Systems
Power Components for Battery Applications
Simple Ideas to Make EMI Issues a Thing of the Past
Stress-Free Electrical Safety for Power Designers
Power Components Simplify 1kW Power Design
Parallel DCMs™
Single DCM™as an Isolated, Regulated DC-DC Converter
Through-Hole ChiP™ Package Soldering Guidelines
Fault-Management Circuit
High Efficiency Battery Charger using Power Components
SM-ChiP™ Reflow Soldering Recommendations
Minimal distortion and power supply noise helps achieve maximum range in portable ground radar
Optimize battery charging and control motor start-up allows longer time in flight for inspection UAVs
Current Share Boards
PI31xx Product Family Reflow Soldering Guidelines
Filter Considerations for the IBC™
Using BCM® Bus Converters in High Power Arrays
Adjustable Latching Output Overcurrent Circuit
Constant Current Control for DC-DC Converters
Micro DC-DC Converter Family Isolated Remote Sense
Soldering Methods and Proceduresfor Vicor Power Modules
Surviving Load Dumps on Military Vehicles
VITA 62 3U Power Supply Parallel Operation
Hot Swap Capability Eliminates Down Time
Maxi, Mini, Micro DC-DC Converters Parallel Bus: PR Pin
Configuring Vicor IBC Converters with niPOLs
RoHS-Compliant Through-Hole VI Chip® Soldering Recommendations
Providing a Constant Current for Powering LEDs using the PRM™and VTM™
PRM™and VTM™Parallel Array Operation
MIL EMI and Transient Solutions
Filter Network Design for VI Chip® DC-DC Converter Modules
FPA Printed Circuit Board Layout Guidelines
SMT J-Lead VI Chip® Soldering Recommendations
Improving the Light Load Efficiency of a VI Chip® Bus Converter Array
Designing High Power Parallel Arrays with PRMs™
Offline Power Supply using the FARM AC Front-End Module
PCB Mount VIA Soldering Guidelines
Recommendations for Maximum Compressive Force of Heat Sinks
Designing a BCM® Pre-Charge Circuit
VI Chip® BCM® Bus Converter Thermal Management
Thermal Management for VIA™ and ChiP™ Modules
Wide Range Trimming with Variable Loads
Active Filters Control EMI, Save PCB Space and Enhance Airflow
Remote radio units better distribute traffic while operating under fault conditions
Conduction-cooling solution allows for truly portable network test equipment
4G remote radio unit extends mobile signal coverage in remote areas
A fanless power solution gives antenna array fast, reliable data coverage.
100% reliable backhaul communications uses an array with a footprint of just 52.97 cm2
A wide-input voltage range allows full utilization of the battery, which extended the range of the UAVs
Multiple power supplies paralleled together provided 9kW high-output power
Different power requirements are handled so that UAVs adapt to different required payloads
Additional electronics for passenger seat actuators are solved with smaller, lighter components
VITA 62 increases existing power specs necessary for aircraft pod-mounted power supply
Distributed antenna system redesign is now powered over ethernet
Powering high-tech 4K cameras overcomes size, weight and EMI requirements
High power supply efficiency provides reliable power over ethernet
A complete N+1 solution maintains uptime for network security AC-DC power supply
AC line input replaces an existing DC solution in an existing PBX system
Industrial welding laser speed and accuracy improves using factorized power architecture
Scalable power solution matches specific power levels for various machines in optical sorting
Automated test equipment’s speed and throughput improves with factorized power architecture
5kW tethered UAVs fly higher and longer using increased voltage on the tether
Decreased weight and size of the power source enables the payload increase of tethered robots
Minimizing the weight, size and transmission losses due to heavy cabling gives tethered UAVs better performance
Explosive-proof camera images in variable lighting conditions become more clear, sharp and accurate with AC-DC solution
Industrial flow meters are more accurate while working over wider flow ranges
Speed, precision, resolution and contrast of engraving lasers is improved using wide-input and output-range regulators
Powering a smart control upgrade minimizes wasted head in hydraulic pumps
Power Distribution Network Design for Automated Test Equipment
Distributing power to HEV/EV electrical systems with DCMs™
Direct infrared countermeasure's optical circuitry runs cooler while meeting stringent EMI specs
Avionic equipment operates simultaneously from multiple power sources in extreme temps without fans
MIL-STD power components withstand mechanical stresses caused by vibration and acceleration in helicopter gearboxes
Enhanced onboard satellite voice and data communications takes advantage of maximized power amplifier efficiency
Supply voltage for the RF amplifier is well regulated during frequency-hopping, providing secure communication in portable radios
Improved efficiency of the power supply allows high temp operation in RF signal intelligence
Dual-sided cooling of power supplies on vertically-mounted racks improves thermal performance for sub-combat control
Pulsed energy demands of airborne infrared countermeasures are averaged out to avoid system interference
More power supports more functionality in the same space used across different platforms in sub sonar systems
Flexible power solution with different outputs allows for easily-upgraded flight simulators
Image stability for the gimbal system improves vehicle-mounted optical sights
Lightweight and small-sized power solution for thermal imaging camera supports increasing power and complexity
Separating the functions of a traditional DC converter improves the speed and accuracy for 3D printers
Slowed ramp-up process relieves stress of the power supply during startup in vehicle mounted advertising displays
Power supply size reduction allows for additional medical diagnostic equipment functionality within the same footprint
The rugged environment for Bus Wi-Fi gets an efficient and reliable power
Different vehicle voltages is accommodated by one solution for digital video recorders
A third more power in just 20% of the space for vehicle GPS applications
Bidirectional DC-DC converters conveniently transfer power between the grid and batteries in home energy storage
High voltage bus converters significantly reduce installation costs for outdoor stadium lighting
Fire alarm control unit uses DC-DC supply and battery backup while increasing functionality
Scalable power solutions allow marine instrumentation to keep precision while operating in extreme environments
Scientific instrumentation gets twice the power without impacting the size of the equipment
Power solution operates in extreme temperatures for LEDs to display brighter lights, longer
Enormous video wall display becomes feasible with a move to component-enabled, higher voltage bus
Handling a variety of user-defined output power requirements for medical carts
Dual-Stage Feedback Technique for Single-Pole Feedback Compensation
Leveraging Bus Converters in Regulated DC-DC Applications
DCM for Tethered UAV Applications
The PI33xx: Zero-Voltage Switching Applied to Buck Regulation
Package Prepares for AI Computing - Electronic Specifier
PFC Single Conversion Line Ripple Cancellation Using the Yeaman Topology
How Vicor Power Components Enable Power Averaging
Why are Power Designs Moving to 48V?
Reverse-Mode Application of Sine Amplitude Converters
Thermal Models of Vicor Power Components
Use of Circuit Models in Thermal Calculations
Build Small, Lighter Power Systems by Eliminating Bulk Capacitance
Analog Control 3623 and 4623 ChiP DCMs™Evaluation Board
PMBus® 2361 and 6123 ChiP™ BCM® Bus Converter Evaluation Board
Analog HV and LV 6123 ChiP™ BCM® Bus Converter Evaluation Board
PI33xx‑2x‑EVAL1 ZVS Switching Regulators I2C™ Digital Interface
PI33xx-xx-EVAL1 ZVS Switching Regulators Multi-Phase
PI31xx-xx-EVAL1 ZVS Isolated DC-DC Converter Evaluation Board
PI3749-x0-EVAL1 ZVS Switching Regulators Buck-Boost Evaluation Board
PI3741-0x-EVAL1 ZVS Switching Regulators Buck-Boost Evaluation Board
PI352x-0x-EVAL1 ZVS Switching Regulators 60VIN Buck Customer Eval Board
PI3740-00-EVAL1, -EVAL2 ZVS Switching Regulators Buck-Boost Evaluation Board
Development Kit User Guide
Power System Designer User Guide
VI Chip® BCM® Evaluation Board
PRM-AL Customer Evaluation Boards
Full-chip PRM™-RS Customer Board
Half-Chip PRM-RS Customer Evaluation Board (For use with PCB part number 35307)
VI Chip® High-Voltage BCM® Customer Evaluation Board
VI Chip® PRM™ Evaluation Board
Constant-Current (CC) Evaluation Board
VI Chip® VTM™ Evaluation Board
PI33xx-xx-EVAL1 & PI34xx-xx-EVAL1 ZVS Buck Regulator Evaluation Board
Meeting the Power Challenges for Today’s Modern Rail
Vicor Powers AI and Automotive
Mitigating Undesired Input Beat Frequencies in Parallel DC-DC Converter Arrays
DCM Design Guide
Scalable, low-weight DC-DC solution for high-capacitive loads in airborne radar
GQFN SiP Soldering Recommendations
PI358x-00-EVAL1 ZVS Regulators 30 – 60VIN ZVS Buck Evaluation Board User Guide
NBM2317 SM-ChiP™(Non-Isolated Bus Converter Module) Evaluation Board User Guide
Managing the heat of the power supply makes rail signaling more reliable
HV ChiP BCM® Reverse Start Up Circuit
Redefining Power Delivery Architectures with Fixed‑Ratio Converters
An Introduction to Vicor's ChiP Technology
An introduction to Vicor's High Voltage BCM Bus Converters
An Introduction to Vicor's PRM® Modules
DC-DC Selector and IBC Simulation Tool
ExaScaler and PEZY Computing unveil the first super computer
Gyoukou Supercomputer Leveraging 48V Factorized Power
An introduction to ZVS Buck Regulators
How to Use the 24 V ZVS Buck Evaluation Board
Improving Output Ripple of DC-DC Converters
Why are power designs moving to 48V?
Output Voltage Trimming
Paralleling DC-DC Converters
Power-on-Package and 3M Demonstration
Power system design: Get to market fast
Redundancy and Power Bus ORing
The challenges of high power LED design
Thermal and mechanical considerations
Building a smarter ultra-wide DC-DC converter solution with multiple parts
How to avoid the "hidden costs" of power system design
Designing military-grade, rapid-start power applications
An easier and more efficient way to keep your LEDs running brighter, longer
Lack of resources and skills hamper successful delivery of power-system projects
Spec changes top list of power designers' challenges
Designing rapid-start power applications that never fail
Power averaging with regulation: a smart solution for pulsed loads
Resources

Meeting the Power Challenges for Today’s Modern Rail

Factorized Power Architecture: Achieving high-density and efficiency in board mounted power


Why are power designs moving to 48V?

When less is more

Redefining Power Delivery Architectures with Fixed‑Ratio Converters
DCM Design Guide
DCM Design Guide
SM-ChiP™ Reflow Soldering Recommendations

VITA 62 increases existing power specs necessary for aircraft pod-mounted power supply
VITA 62 3U Power Supply Parallel Operation
VITA 62 Power Supply 270VDC Input I2C™Communication

Vicor Powers AI and Automotive
VIA™ Package PMBus® Interface and Accessories User Guide
PMBus® Interface and Accessories User Guide (For use with adapter part number I2C-ADAPTER-A02)
GQFN SiP Soldering Recommendations
PI358x-00-EVAL1 ZVS Regulators 30 – 60VIN ZVS Buck Evaluation Board User Guide
Assembly Guideline for ZVS Buck and Buck-Boost, 10 x 10mm and 10 x 14mm LGA/BGA Packages

Building a smarter ultra-wide DC-DC converter solution with multiple parts
PFC MicroSTMPower Factor Corrected AC-DC Switcher
PFC MicroTM Power Factor Corrected AC-DC Switcher
PFC MiniTM Power Factor Corrected AC-DC Switcher
QPI-12-CB1-EVAL Board
QPI-x-EVAL1
QPO-1-EVAL1
QPO-2-EVAL1
FlatPAC-EN™ and FlatPAC-EN MI EN-Compliant Autoranging Switchers

Power averaging with regulation: a smart solution for pulsed loads
PI33xx‑2x‑EVAL1 ZVS Switching Regulators I2C™ Digital Interface

Image stability for the gimbal system improves vehicle-mounted optical sights

Designing Power Systems for Modern Railway Applications

Your Power System Failed its Conducted EMI Test – Now What?
Thermal Management for VIA™ and ChiP™ Modules

Scalable, low-weight DC-DC solution for high-capacitive loads in airborne radar

DCM for Tethered UAV Applications
NBM2317 SM-ChiP™(Non-Isolated Bus Converter Module) Evaluation Board User Guide

Direct infrared countermeasure's optical circuitry runs cooler while meeting stringent EMI specs

Supply voltage for the RF amplifier is well regulated during frequency-hopping, providing secure communication in portable radios


Leveraging Bus Converters in Regulated DC-DC Applications

Package Prepares for AI Computing - Electronic Specifier

PFC Single Conversion Line Ripple Cancellation Using the Yeaman Topology

A Novel Approach to Industrial Rectifier Systems: Dense, Efficient and Modular Architecture Enabled by Fixed-Ratio Bus Converters

Practical EMI Control in a Power Component Design Space

How Vicor Power Components Enable Power Averaging

Mitigating Undesired Input Beat Frequencies in Parallel DC-DC Converter Arrays

A wide-input voltage range allows full utilization of the battery, which extended the range of the UAVs

Different power requirements are handled so that UAVs adapt to different required payloads
PI31xx-xx-EVAL1 ZVS Isolated DC-DC Converter Evaluation Board

Stress-Free Electrical Safety for Power Designers

The Power Dilemma for the Next Generation of Automobiles

Lack of resources and skills hamper successful delivery of power-system projects
Recommendations for Maximum Compressive Force of Heat Sinks

Control of a Discontinuous-Conduction-Mode ZVS Buck-Boost Topology for Microprocessor Core Power

High-performance ZVS buck regulator removes barriers to increased power throughput in wide input range point-of-load applications

Thermal Models of Vicor Power Components

Use of Circuit Models in Thermal Calculations

Designing military-grade, rapid-start power applications
Creating High-Voltage Outputs for the Micro, Mini, Maxi; VI-200, MI-200; VI-J00, MI-J00 converter families only

An easier and more efficient way to keep your LEDs running brighter, longer

Why are Power Designs Moving to 48V?

Reverse-Mode Application of Sine Amplitude Converters

How to avoid the "hidden costs" of power system design
PFC MegaPAC-ELTM PFC MegaPAC-HPELTM Power Factor Corrected AC-DC Switchers
PFC MegaPACTM Power Factor Corrected AC-DC Switchers
HV ChiP BCM® Reverse Start Up Circuit

Power-on-Package and 3M Demonstration

Designing rapid-start power applications that never fail
Power System Designer User Guide
Designing High Power Parallel Arrays with PRMs™
Filter Considerations for the IBC™
Micro DC-DC Converter Family Isolated Remote Sense
Improving the Light Load Efficiency of a VI Chip® Bus Converter Array
Offline Power Supply using the FARM AC Front-End Module

Spec changes top list of power designers' challenges
Fault-Management Circuit
Designing a BCM® Pre-Charge Circuit
DC MegaPACTM DC-DC Switcher

Gyoukou Supercomputer Leveraging 48V Factorized Power

Decreased weight and size of the power source enables the payload increase of tethered robots

Power sharing among converters simplifies remote upgrading of optical packet transport systems

AC line input replaces an existing DC solution in an existing PBX system

High power supply efficiency provides reliable power over ethernet

Powering high-tech 4K cameras overcomes size, weight and EMI requirements

Remote radio units better distribute traffic while operating under fault conditions

Distributed antenna system redesign is now powered over ethernet

Low-profile AC-DC solution allows distributed antenna system to run at high temps without fans

100% reliable backhaul communications uses an array with a footprint of just 52.97 cm2

A fanless power solution gives antenna array fast, reliable data coverage.

4G remote radio unit extends mobile signal coverage in remote areas

Conduction-cooling solution allows for truly portable network test equipment

A complete N+1 solution maintains uptime for network security AC-DC power supply

Industrial flow meters are more accurate while working over wider flow ranges

Explosive-proof camera images in variable lighting conditions become more clear, sharp and accurate with AC-DC solution

The rugged environment for Bus Wi-Fi gets an efficient and reliable power

Different vehicle voltages is accommodated by one solution for digital video recorders

Automated test equipment’s speed and throughput improves with factorized power architecture

Fire alarm control unit uses DC-DC supply and battery backup while increasing functionality

Industrial welding laser speed and accuracy improves using factorized power architecture

Scalable power solutions allow marine instrumentation to keep precision while operating in extreme environments

Bidirectional DC-DC converters conveniently transfer power between the grid and batteries in home energy storage

Handling a variety of user-defined output power requirements for medical carts

Power supply size reduction allows for additional medical diagnostic equipment functionality within the same footprint

Scalable power solution matches specific power levels for various machines in optical sorting

Power solution operates in extreme temperatures for LEDs to display brighter lights, longer

High voltage bus converters significantly reduce installation costs for outdoor stadium lighting

Scientific instrumentation gets twice the power without impacting the size of the equipment

Minimizing the weight, size and transmission losses due to heavy cabling gives tethered UAVs better performance

Managing the heat of the power supply makes rail signaling more reliable

Slowed ramp-up process relieves stress of the power supply during startup in vehicle mounted advertising displays

Speed, precision, resolution and contrast of engraving lasers is improved using wide-input and output-range regulators

5kW tethered UAVs fly higher and longer using increased voltage on the tether

Separating the functions of a traditional DC converter improves the speed and accuracy for 3D printers

Enormous video wall display becomes feasible with a move to component-enabled, higher voltage bus
PI31xx Product Family Reflow Soldering Guidelines
Maxi, Mini, Micro DC-DC Converters Parallel Bus: PR Pin

Powering a smart control upgrade minimizes wasted head in hydraulic pumps

A third more power in just 20% of the space for vehicle GPS applications
Accurate Point-of-Load Voltage Regulation using Simple Adaptive-Loop Feedback
Using BCM® Bus Converters in High Power Arrays
VI Chip® BCM® Bus Converter Thermal Management
FPA Printed Circuit Board Layout Guidelines
PRM™and VTM™Parallel Array Operation
Through-Hole ChiP™ Package Soldering Guidelines
Filter Network Design for VI Chip® DC-DC Converter Modules
RoHS-Compliant Through-Hole VI Chip® Soldering Recommendations
SMT J-Lead VI Chip® Soldering Recommendations
PI3325-00-EVAL1 ZVS Switching Regulators 60VIN Buck Customer Eval Board User Guide
Providing a Constant Current for Powering LEDs using the PRM™and VTM™

Optimize battery charging and control motor start-up allows longer time in flight for inspection UAVs

Flexible power solution with different outputs allows for easily-upgraded flight simulators

Lightweight and small-sized power solution for thermal imaging camera supports increasing power and complexity

Enhanced onboard satellite voice and data communications takes advantage of maximized power amplifier efficiency

More power supports more functionality in the same space used across different platforms in sub sonar systems

Minimal distortion and power supply noise helps achieve maximum range in portable ground radar

Multiple power supplies paralleled together provided 9kW high-output power

Low levels of conducted and radiated EMI enable detection of signals outside the aircraft in airborne electronic countermeasure

Dual-sided cooling of power supplies on vertically-mounted racks improves thermal performance for sub-combat control

Improved efficiency of the power supply allows high temp operation in RF signal intelligence

MIL-STD power components withstand mechanical stresses caused by vibration and acceleration in helicopter gearboxes
MIL EMI and Transient Solutions
Achieving High Accuracy Voltage (or Current) Regulation with the DCM™ Up to ±1% Regulation
Configuring Vicor IBC Converters with niPOLs
Undervoltage/Overvoltage Lockout for VI-200/VI-J00 and Maxi, Mini, Micro Converters
Current Share Boards
Meeting Transient Specifications for Electrical Systems in Military Vehicles
Thermal Considerations: Assuring Performance of the Vicor Maxi, Mini, Micro Series High-Density DC-DC Converter Modules
Creating Higher Voltage Outputs Using Series Connected Sine Amplitude Converters
Parallel DCMs™
Single DCM™as an Isolated, Regulated DC-DC Converter
Soldering Methods and Proceduresfor Vicor Power Modules
Surviving Load Dumps on Military Vehicles
Wide Range Trimming with Variable Loads
Designing High-Power Arrays Using Maxi, Mini and Micro Family DC-DC Converters
Using Modular DC-DC Converters to Meet European Standards for Railway Applications
High Efficiency Battery Charger using Power Components
PCB Mount VIA Soldering Guidelines
Constant Current Control for DC-DC Converters
Adjustable Latching Output Overcurrent Circuit
Hot Swap Capability Eliminates Down Time
Power Components Simplify 1kW Power Design

Meeting the demands of SWaP-C for aerospace and defense products

Additional electronics for passenger seat actuators are solved with smaller, lighter components

Meeting DC-DC Power System Requirements in Defense Applications

Power Components for Battery Applications
PI352x-0x-EVAL1 ZVS Switching Regulators 60VIN Buck Customer Eval Board
PI3740-00-EVAL1, -EVAL2 ZVS Switching Regulators Buck-Boost Evaluation Board

The challenges of high power LED design

ExaScaler and PEZY Computing unveil the first super computer
PI3741-0x-EVAL1 ZVS Switching Regulators Buck-Boost Evaluation Board

Simple Ideas to Make EMI Issues a Thing of the Past

Thermal Simulation for Cooler Power Systems

Maximum Load: The Wrong Specification for Pulsed Power

Enabling Bi-Directional Energy Flow Using DC Power Transformers
28VDC MIL-COTS VIPAC Design Guide

Power system design: Save time using Vicor's Power System Designer tool

Power system design: Get to market fast

Distributing power to HEV/EV electrical systems with DCMs™

Build Small, Lighter Power Systems by Eliminating Bulk Capacitance
Development Kit User Guide
PI3749-x0-EVAL1 ZVS Switching Regulators Buck-Boost Evaluation Board
NBM6123 ChiP™Analog Low-Voltage Non-Isolated Bus Converter Module Evaluation Board
PI354X-00 Evaluation Board 36V to 60VIN, 2.5, 3.3, 5.0 and 12VOUT Buck Regulator & LED Driver
PMBus® 2361 and 6123 ChiP™ BCM® Bus Converter Evaluation Board
Analog HV and LV 6123 ChiP™ BCM® Bus Converter Evaluation Board
VIPACTM Design Guide
3-Phase MegaPAC-ELTM (Low Noise), 4kW MegaPAC-ELTM (Low Noise), AC-DC Switchers
Analog Control 3623 and 4623 ChiP DCMs™Evaluation Board

An introduction to Vicor's High Voltage BCM Bus Converters
Full-chip PRM™-RS Customer Board
VI Chip® BCM® Evaluation Board
VI Chip® Remote-Sense PRM™ Evaluation Board (For use with PCB part numbers 39537 and 38693)
PI33xx-xx-EVAL1 & PI34xx-xx-EVAL1 ZVS Buck Regulator Evaluation Board

Power Distribution Network Design for Automated Test Equipment
PRM-AL Customer Evaluation Boards
Half-Chip PRM-RS Customer Evaluation Board (For use with PCB part number 35307)
VI Chip® VTM™ Evaluation Board
VI Chip® High-Voltage BCM® Customer Evaluation Board

High-voltage DC distribution is key to increased system efficiency and renewable energy opportunities

How to meet European standards for rail applications
VI Chip® PRM™ Evaluation Board

350 – 12VDC “Yeaman Topology” Power System

Active Filters Control EMI, Save PCB Space and Enhance Airflow

Reduce Load Capacitance in Noise-Sensitive, High-Transient Applications, through Implementation of Active Filtering

Dual-Stage Feedback Technique for Single-Pole Feedback Compensation

The PI33xx: Zero-Voltage Switching Applied to Buck Regulation

An Introduction to Vicor's ChiP Technology

An Introduction to Vicor's PRM® Modules

Enables quick and easy configuration of complete, high efficiency, compact, multi-output power systems.

An introduction to ZVS Buck Regulators

How to Use the 24 V ZVS Buck Evaluation Board
PI33xx-xx-EVAL1 ZVS Switching Regulators Multi-Phase

Power system architectures for higher voltage DC distribution

Redundancy and Power Bus ORing

Thermal and mechanical considerations

Output Voltage Trimming

Paralleling DC-DC Converters

Improving Output Ripple of DC-DC Converters

DC-DC Selector and IBC Simulation Tool
Constant-Current (CC) Evaluation Board

Innovation in military power supplies: Intelligence, standardization, efficiency
Vicor bus converter earns coveted 2019 Leap Award

Disrupting Conventional Electrical Power within Automotive

Boosting performance in 48V power distribution

5 minutes on AI with Robert Gendron

5 minutes on AI with Ian Mazsa

What does it take to power Artificial Intelligence Systems and GPUs?

Adopting the 48V battery

Data center power in 2019

Power supply management in quantum computers

Military power electronics seeks to increase voltage and efficiency

Avionic equipment operates simultaneously from multiple power sources in extreme temps without fans

Pulsed energy demands of airborne infrared countermeasures are averaged out to avoid system interference
VIPAC ArrayTM Design Guide